. /repos/VimbaX_2023-1/cti/SetGenTLPath.sh
. /repos/VimbaX_2023-1/cti/SetGenTLPath.sh
#Then set the MTU to 9000 for “jumbo frames”
sudo ifconfig eth0 down
sudo ifconfig eth0 mtu 9000
sudo ifconfig eth0 up


#DEV_000A4708FDDF is the MAC of the Camera I sent you!
#Set the IP Address of the camera to whatever you’d like
#Must set IP each Power cycle of camera
#Assuming camera is on same LAN, just type:
/repos/VimbaX_2023-1/bin/ConfigIp_VmbC DEV_000A4708FDDF 192.168.1.25 255.255.0.0

#Now launch the viewer. Click on the camera and then click the Play button in the new window that appears.
/repos/VimbaX_2023-1/bin/VimbaXViewer